Finishes and decorative coatings

BONIFIN
Powder material, with cement, hydrated lime, carbonate sand with selected granulometry, synthetic resins and special additives.
TECHNICAL FEATURES
- It is characterized by an excellent opening and workability, which
facilitates application in indoor and outdoor surfaces that are filled with traditional mortar and pre-prepared mortar as well.
-It is applicable up to a thickness of 3 mm.
AREA OF APPLICATION
It is suitable for finishes in surfaces filled with traditional or pre-prepared cement-based or lime-based mortar. It can be covered with paint or other coatings of mineral and synthetic nature.

Datasheet
BONIFIN.pdf

FINO ANTIQUE

Product for finishes of antique view.
TECHNICAL FEATURES
Powder material produced based on HTT technology (Horman Transpirance Tecnology) which prevents mold creation and allows the transpiration of cement-based, hydrated lime, marble carbonate sand and marble of selected granulometry, synthetic resins and special additives walls. It is characterized by an excellent opening and workability, and facilitates application in indoor and outdoor surfaces which are filled with traditional mortar and pre-prepared mortar as well. It is applicable up to a thickness of 3 mm.
AREA OF APPLICATION
It is suitable for finishes in surfaces filled with traditional or pre-prepared cement-based or lime-based mortar. It can be covered with paint or other coatings of mineral and synthetic nature.

Datasheet
FINO ANTIQUE.pdf

GRAFIATO SILEX
Decorative and ready to use coat, that serves for the treatment of facades and indoor silicone-based surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Tecnology) ), it allows wall airing and mold prevention. Thanks to the new formula with synthetic fibers and special additives in its content, this product does not allow cracks and impurities to unify with it, thus self-cleansing easily.
GENERAL FEATURES
- It allows vapor permeability of the wall.
- Forms a stable structure.
- Closes plaster cement-lime based cracks.
- Forms a beautiful and protective structure against atmospheric agents.
- It is characterized by good opening and workability.
- It is characterized by a long working time.
- Conform EN 998 - 1.
- Easily applied product.
- The product has high self-cleaning properties.
AREA OF APPLICATION
It is suitable to create decorative coatings with excellent waterproof, adhesive and elastic qualities. It is also used to create decorative coatings on surfaces filled with basic insulating mortars, which have been flattened beforehand with TECNOFIX or CONEXION 99 in the thermal insulation systems, after having been treated with TECNOFIX LIQUID.

Datasheet
GRAFIATO SILEX.pdf

DECORTEX
Decorative silanated and ready to use coat, that serves for the treatment of facades and indoor surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Technology), it allows wall airing and mold prevention. Thanks to the new formula with synthetic fibers and special additives in its content, this product does not allow cracks and impurities to unify with it, thus self-cleansing easily.
GENERAL FEATURES
- It allows vapor permeability of the wall.
- Forms a stable structure.
- Closes cement-lime based cracks in plasters.
- Forms a beautiful and protective structure against atmospheric agents.
- It is characterized by good opening and workability.
- It is characterized by a long working time.
- In conformity with EN 998 - 1.
- Easily applied product.
AREA OF APPLICATION
It is suitable to create decorative coatings with excellent waterproof, adhesive and elastic qualities. It is also used to create decorative coatings on surfaces filled with basic thermal insulating mortars, which have been flattened beforehand with TECNOFIX or CONEXION 99 in the thermal insulation systems, after having been treated with
TECNOFIX LIQUID.

Datasheet
DECORTEX .pdf

GRAFIATO ACRYL
Decorative and ready to use coat, that serves for the treatment of facades and indoor surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Tecnology), it allows wall airing and mold prevention. Thanks to the new formula with synthetic fibers and special additives in its content, this product does not allow cracks and prevents impurities from unifying with it, thus it self-cleanses easily.
GENERAL FEATURES
- It allows vapor permeability of the wall.
- Forms a stable structure.
- Closes cement-lime based cracks in plasters.
- Forms a beautiful and protective structure against atmospheric agents.
- It is characterized by good opening and workability.
- It is characterized by a long working time.
- In conformity with EN 998 - 1.
- Easily applied product.
AREA OF APPLICATION
It is suitable to create decorative coatings with excellent waterproof, adhesive and elastic qualities. It is also used to create decorative coatings on surfaces filled with basic thermal insulating mortars, which have been flattened beforehand with TECNOFIX or CONEXION 99 in the thermal insulation systems, after having been treated with TECNOFIX LIQUID.

Datasheet
GRAFIATO ACRYL.pdf

GRAFIATO 1, 2, 3
Decorative coating that serves for the treatment of facades and indoor
surfaces.
Product classification
GRAFIATO is classified according to EN 998 - 1.
FEATURES
- For indoor and outdoor use.
- High resistance to weather conditions.
- Good workability.
- Forms a stable and long-lasting structure.

Datasheet
GRAFIATO 1, 2, 3.pdf

DECOQUARTZ
Decorative coating that serves for the treatment of facades and indoor surfaces.
PRODUCT CLASSIFICATION
DECOQUARTZ is classified according to EN 998 – 1 standard.
FEATURES
- For indoor and outdoor use.
- High resistance to weather conditions.
- Good workability.
- Forms a stable and long-lasting structure.
AREA OF APPLICATION
DECOQUARTZ is suitable to create decorative coatings with excellent waterproof, adhesive and elastic qualities. It is also used to create decorative coatings on surfaces filled with cement mortar or basic thermal insulating mortar, which have been flattened beforehand with TECNOFIX or one product from DW CONEXION line of products.

Datasheet
DECOQUARTZ.pdf

ACRYL SPACHTEL
Plaster stucco produced based on nanotechnology, to realize smooth finishes in outdoor and indoor environments.
TECHNICAL FEATURES
-Plaster stucco, composed of white cement, hydrated lime, white marble powder, resins and special additives.
-Produces based on nanotechnology.
-Used for indoor and outdoor environments
-Allows a thickness from 0 up to 3 mm for every layer.
-Easily rubbed with sandpaper and provides a solid and smooth finishing
-It is in conformity with EN 998 – 1 norm.
AREA OF APPLICATION
-It is used to stucco walls and ceiling filled with traditional mortar or pre-prepared lime and cement- based mortar.
-It is used to stucco concrete surfaces.
-It is used to create smooth finishes in indoor and outdoor
environments.

Datasheet
ACRYL SPACHTEL.pdf

SPATORELLA
Plaster stucco for smooth finishes.
TECHNICAL FEATURES
-Plaster stucco, composed of white cement, hydrated lime, white marble powder, resins and special additives.
-Characterized by good workability and easy opening; without vertical slip, thus facilitating application in vertical surfaces.
-Used for indoor and outdoor environments
-Allows a thickness from 1 up to 3 mm for every layer.
-Easily rubbed with sandpaper and provides a solid and smooth finishing
-It is in conformity with EN 998 – 1 norm.
AREA OF APPLICATION
-It is used to stucco walls and ceiling filled with traditional mortar or pre-prepared lime and cement- based mortar.
-It is used to stucco concrete surfaces.
- It is used to stucco gypsum-board walls and ceiling.

Datasheet
SPATORELLA.pdf