Hydroinsulation

MONOFLEX
Flexible, waterproofing, mono-component material, with good waterproofing and protective qualities.
TECHNICAL FEATURES
Dust, cement-based, mono-component material, with selected granulometry, synthetic resins, special additive and hydrophobic qualities. The material is mixed with water, thus creating a liquid and homogeneous mixture. Easily applicable through a spatula or brush. Thanks to its high content of resins, it possesses good adhesive qualities.
CHARACTERISTICS
1. Should not be used to waterproof plastic, wood, drywall or painted walls.
2. Do not add other components, such as cement, lime, etc, in the mixture.
3. Do not apply it in surfaces which contain stagnant water.
4. Do not use the product to solve problems of internal condensation; for this, you should use an appropriate product.
5. If you want to improve the product’s elasticity, reinforce it with FLEXIT additive.
AREA OF APPLICATION
It is used for the laying of waterproofing membranes prior to fixing the tiles, indoor and outdoor. It is used for the waterproofing of internal and external underground walls, water deposits, restrooms, terraces, balconies and fountains. It provides a flexible and resistant protection towards water and humidity for concrete and plaster surfaces. It provides waterproofing and elastic leveling for cracked plasters.

Datasheet
MONOFLEX.pdf

IZOFLEX
Two component, cement-based material, and elastic waterproof.
CHARACTERISTICS
Bi-component, cement-based waterproof, with inerts of selected granulometry, special additives and synthetic polymers in water-dispersion. By mixing the two components, you will get a mixture that can be applied even in vertical surfaces, in a thickness up to 1mm per layer. Thanks to its high content of synthetic resins, it guarantees an excellent adhesion in all concrete, brick and ceramic surfaces (pre-prepared). After solidification, it creates a waterproofing and elastic layer, which is resistant to atmospheric agents.
AREA OF APPLICATION
● To lay waterproofing membranes prior to tiling, indoor and outdoor.
● Flexible and elastic protection towards water and humidity for concrete and plaster surfaces. The bigger the water pressure, the thicker should be the application of the product.
● Waterproofing and protective coating for concrete surfaces that are subject to chemical aggression, such as: antifreeze salts, sulfates, etc.
● Waterproofing and elastic leveling of cracked plasters.
● Waterproofing and protective coating for wall foundations.
● Suitable for the waterproofing of surfaces which are subject to vibrations and various deformations.
● Waterproofing of pools with matured concrete (over 6 months).

Datasheet
IZOFLEX.pdf

IZOELASTIC
Two component, waterproof and cement-based material, elastic, with protective function for terraces, foundations, swimming pools and basements.
CHARACTERISTICS
Two component, cement-based waterproof, with inerts of selected granulometry, special additives and synthetic polymers in water-dispersion. By mixing the two components, you will get a mixture that can be applied even in vertical surfaces, in a thickness up to 1mm per layer. Thanks to its high content of synthetic resins and their qualities, it guarantees an excellent adhesion in all concrete, brick and ceramic surfaces (pre-prepared). After solidification, it creates a waterproofing and elastic layer, which is resistant to atmospheric agents.
AREA OF APPLICATION
● To lay waterproofing membranes prior to tiling, indoor and outdoor.
● Flexible and elastic protection towards water and humidity for concrete and plaster surfaces. The bigger the water pressure, the thicker should be the application of the product.
● Waterproofing and protective coating for concrete surfaces that are subject to chemical aggression, such as: antifreeze salts, sulfates, etc.
● Waterproofing and elastic leveling of cracked plasters.
● Waterproofing and protective coating for wall foundations.
● Suitable for the waterproofing of surfaces which are subject to vibrations and various deformations.
● Waterproofing of pools with matured concrete (over 45 days).

Datasheet
IZOELASTIC.pdf

AQUABLOCKER PU

Mono-component, polyurethane-based, ready to use waterproof.
CHARACTERISTICS
AQUABLOCKER PU is a polyurethane-based, waterproofing coating material for terraces, with high content of polyurethane resins.
●Offers high waterproofing and elasticity.
●It is characterized by excellent adhesive qualities in all cement-based surfaces, in surfaces made of bricks, wood or metal, and on every other waterproofing material. It can be also used in unleveled layers.
●It ensures high elasticity, thus avoiding cracks and crevices that can be created with time.
●The white color of waterproof during summer helps in lowering the temperature. It is hermetic but allows vapor permeability.
AREA OF APPLICATION
AQUABLOCKER PU is used as waterproof in terraces, balconies, walls and places with humidity. It is easily applicable, thus creating a waterproofing membrane with high elasticity and mechanic resistance, without creating cracks or shrinkage. It is also easily applicable in difficult surfaces such as angles, junctions of different materials that create joints, etc. AQUABLOCKER PU is not recommended to be used for the waterproofing of underground basements.

Datasheet
AQUABLOCKER PU.pdf

IZOELASTIC LIQUID
Is a painting, waterproofing material for terraces, with high content of elastomeric resins.
● It offers a high waterproofing and elasticity.
● It is characterized by excellent adhesive qualities in all cement-based surfaces, in surfaces made of bricks, wood or metal, and every other waterproofing material.
● It can be applied even in unleveled layers.
● It ensures a high elasticity, thus avoiding the creation of cracks and crevices which might create with time.
● The white color of the waterproof helps in lowering the temperature during summer; it is hermetic but allows vapor permeability
AREA OF APPLICATION
IZOELASTIC LIQUID is used as waterproof in terraces, balconies, walls and places with humidity. It is easily applicable, thus creating a waterproofing membrane with high elasticity and mechanic resistance, without creating cracks or shrinkage. It is also easily applicable in difficult surfaces such as angles, junctions of different materials that create joints, etc. IZOELASTIC LIQUID is not recommended to be used for the waterproofing of underground basements.

Datasheet
IZOELASTIC LIQUID.pdf

DW IZOL
Elastic liquid waterproofing membrane.
DESCRIPTION
DW IZOL is a ready to use product, which is applied with brush or roller. After it gets dried, it creates a very elastic membrane, which is impervious from water and allows its evaporation.
AREA OF APPLICATION
DW IZOL is ideal to waterproof surfaces such as balconies, restrooms, etc., before laying ceramic tiles. It is suitable for all types of wall or floor surfaces constructed with concrete, gypsum tiles, etc. this product cannot be applied in surfaces where there is water pressure.
MANNER OF APPLICATION/CONSUMPTION
The support should be clean, free of grease, dust, oils, etc. Cracked parts should be repaired before its application. Prior to the application of DW IZOL, the support is treated with HYDRO PRIMER in a quantity of approximately 200 - 300 g/m2, depending on the absorption capacity of the support.

Datasheet
DW IZOL.pdf

HIDROSTOP
Fast drying waterproof, to stop leaks.
DESCRIPTION
HIDROSTOP is a fast drying waterproof, after contact with water.
AREA OF APPLICATION
HIDROSTOP is used to stop water leaks, thanks to its fast drying and adhesion qualities.
MANNER OF APPLICATION/CONSUMPTION
1.Preparation of support:
The support should be clean, and wet. Clean any type of residues, oils, paints.
2.APPLICATION
Give the part where water leaks a conical shape in a 2 – 3 cm depth.
HIDROSTOP should be gradually added to water and stirred immediately until it creates a sloppy mixture. The obtained mixture is compressed into the leaking spot and is kept there for approximately 2 minutes, until it gets solid.

Datasheet
HIDROSTOP.pdf

IZOBAND S10
Insulating band for the angles of walls and floors

IZOBAND EX 90
Waterproof element to cover the angles of walls

IZOBAND IN 90
Waterproof element to cover the angles of walls

IZOTUBE
Reinforcing element used during the process of waterproofing for exits of hydraulic
installations, water tubes, etc, from the wall

Datasheet
IZOTUBE.pdf

IZODRAIN
Reinforcing element used during the process of waterproofing for drains

Datasheet
IZODRAIN.pdf

IZOCARPET
Carpet that reinforces the waterproof of floors and walls

Datasheet
IZOCARPET.pdf

IZOTAPE ULTRA S 20 + DW 9000 EPO-UNI
Insulating band with a 20cm depth for dilatation joints insulation, which is used
together with DW 9000 EPO-UNI adhesive

Datasheet
IZOTAPE ULTRA S 20 + DW 9000 EPO-UNI.pdf

IZOTAPE ULTRA S 30 + DW 9000 EPO-UNI
Insulating band with a 30cm depth for dilatation joints insulation, which is used
together with DW 9000 EPO-UNI adhesive

Datasheet
IZOTAPE ULTRA S 30 + DW 9000 EPO-UNI.pdf

IZOTAPE U 200
Rubber-shaped material, with expansive properties for waterproofs in concrete joints

Datasheet
IZOTAPE U 200.pdf

IZOTAPE FU 280
Rubber-shaped material, with tensile properties for waterproofs in concrete joints

Datasheet
IZOTAPE FU 280.pdf

IZOTAPE XB 22
Rubber-shaped material, with tensile properties for waterproofs in objects joints

Datasheet
IZOTAPE XB 22.pdf

IZOTRATE
Is a cement-based mortar. It is applied with a brush. It contains active chemicals, which when in contact with moisture and lime and lime hydroxide, enter a reaction, thus forming insoluble crystals. These crystals block the capillaries and cracks formed inside as a consequence of concrete shrinkages and swellings, thus preventing further absorption of water. IZOTRATE offers a number of advantages, among which we mention:
●Stays permanently active, thus permanently protecting the construction from the presence of water.
●Connects perfectly with the concrete, thus giving it the desirable qualities.
●Capable of closing cracks up to 400 micron, even if they appear after the application.
●In cases when the concrete surface or waterproof coat is damaged, there is no impact on the waterproofing of construction.
●Protects reinforced constructions with steel from corrosion.
●Is used to waterproof water deposits or surfaces that are in direct contact with water.
●Does not affect the chemical processes of other elements present in the concrete.
●Is easily used and has low costs.
●This product is classified as a coat for concrete protection.
AREA OF APPLICATION
It waterproofs concrete surfaces in cases of moisture presence and water pressure. IZOTRATE is suitable for waterproofing basements, manholes, wastewater deposits, and especially foundations.

Datasheet
IZOTRATE.pdf

IZOCRYSTAL
Is a concrete waterproofing additive in powder form, added during the preparation of concrete, thus creating an insoluble and crystalline composition.
CHARACTERISTICS
IZOCRYSTAL is a concrete waterproofing additive in powder form, added during the preparation of concrete, thus creating an insoluble and crystalline composition. It improves impermeability from water, without affecting the permeability of concrete vapors. It remains active all the time and also accepts positive and negative hydrostatic pressures. Suitable to waterproof foundations, basements, reservoirs, septic tanks, swimming pools etc. (It is classified with sign CE as concrete mixture, water resistant, according to standard EN 934 - 2:T9)
AREA OF APPLICATION
IZOCRYSTAL is a product necessary to produce concrete with high mechanical properties, concrete that is not plastered (for decorative purposes), concrete that is suitable to be casted with pump, etc. it is also used for the construction of concrete elements that have a continuous or temporary presence of water, such as: foundations, basements, reservoirs, tunnels, channels, wastewater treatment plants, pools, etc.

Datasheet
IZOCRYSTAL.pdf

BETOZOL
Waterproofing additive for concrete
DESCRIPTION
BETOZOL is a liquid additive which gives concrete waterproof quality. The product reacts chemically with the lime that is formed from hydration of cement and creates salts which, on the one side, block capillary pores but on the other side, give concrete hydrophobic properties. An important quality of BETOZOL is that, compared to other additives of its category, it does not cause reduction of the final resistances of concrete. (According to table 9 of standard ELOT EN 934 - 2 the reduction of resistance in compression is allowed up to the scale of 15%).
AREA OF APPLCIATION
BETOZOL is used to improve concrete resistance from water absorption, and also to improve impermeability of concrete from water in cases of foundations, basements walls, water reservoirs, pools, wells, tunnels, etc., the product can be added during the preparation of concrete or before concrete casting.
• The waterproof of concrete mixture eliminates the risk of frost damages and prevents formation of stains from creation of salts.
• In engineering projects such as highways, bridges, hydraulic platforms, etc., it increases considerably concrete resistance from salts that were used as antifreeze.
• Creation of chemical compounds that block pores does not prevent ventilation of the structure.
• In accordance with standard ELOT EN 934 - 2:2001, Table 9.

Datasheet
BETOZOL.pdf

EPOXY BITUM Z 877
Bitumen-based epoxy waterproof, with good adhesive properties and resistant to chemicals.
CHARACTERISTICS
EPOXY BITUM Z 877 is a bitumen-based epoxy, waterproof, coating material.
●It provides a high waterproofing and elasticity.
●It is characterized by very good adhesive qualities in all cement-based surfaces and also in surfaces made of wooden or metal bricks and on every other type of waterproofing material. It can be also used in unleveled layers.
●It provides high flexibility, thus avoiding the formation of cracks and crevices that can be created over time.
●Gives resistance to chemicals.
AREA OF APPLICATION
EPOXY BITUM Z 877 is used as a waterproof in terraces, balconies, walls, and humid places. It is easily applied, thus creating a waterproofing membrane with high elasticity and mechanical resistance, without creating cracks and shrinkage. It is also easily applicable in difficult areas, such as angles, junctions of different materials that create joints, etc. EPOXY BITUM Z 877 is recommended to be used for the waterproof of underground basements and of places where a high resistance to chemicals is required.

Datasheet
EPOXY BITUM Z 877.pdf

IZOGRAND ULTRA 880
Bi-component waterproof, with good adhesive properties and resistant to chemicals.
CHARACTERISTICS
IZOGRAND ULTRA 880 is a bi-component, waterproof, coating material.
●It provides a high waterproof and elasticity.
●It is characterized by very good adhesive qualities in all cement-based surfaces and also in surfaces made of wooden or metal bricks and on every other type of waterproofing material. It can also be used in unleveled layers.
●It provides high flexibility, thus avoiding the formation of cracks and crevices that can be created over time.
●Resistance to chemicals.
AREA OF APPLICATION
IZOGRAND ULTRA 880 is used as a waterproof in terraces, balconies, walls, and humid places. It is also applied to waterproof public works, such as tunnel, hydropower, etc. It is easily applied and creates a waterproofing membrane with high elasticity and mechanical resistance, without creating cracks and shrinkage. It is also easily applicable in difficult areas, such as angles, junctions of different materials that create joints, etc. IZOGRAND ULTRA 880 is recommended to be used for the waterproof of underground basements and of places where a high resistance to chemicals is required.

Datasheet
IZOGRAND ULTRA 880.pdf

SEALEX FACADE PROTECT
Silicone-based material, which contains solvent.
CHARACTERISTICS
Silicone-based, hydro-resistant material, which contains solvent. It
retains its transparency and does not create “skin”, thanks to its great permeation (micro technology), thus ensuring substrate airing. It
accentuates the natural colors of stone, by giving the view of being wet. It protects the bonding mortar of stones from moisture and corrosion in the future, from the impact of frost and water absorption, resulting in the flow of salts. It gives immediate and long-lasting protection.
AREA OF APPLCIATION
SEALEX FASADE PROTECT is suitable to be used in every type of coating for natural and artificial stones, in outdoor and indoor wall surfaces.
Sprinkling the stones, mainly, does not allow their pollution, thus
always protecting them naturally. Plaster or concrete masonries that are coated with two layers of SEALEX FASADE PROTECT, and are not
followed by paint coating, are protected completely from moisture
absorption for many years, thus substituting the primer and allowing its coating in the coming years. For outdoor tile floors that are near
gardens, it is recommended to water them beforehand, in order to ensure the protection of stones from moisture.

Datasheet
SEALEX FACADE PROTECT.pdf