Adhesives

DW 1100
Cement-based adhesive, for the adhesion of ceramic tiles
CLASSIFICATION OF PRODUCT
DW 1100 is classified as C1TE according to EN 12004, base C cement, Nr. 1 adhesive with a normal strength of adhesion, T anti-slip,
E – prolonged time of workability
CHARACTERISTICS
-For indoor and outdoor use in residential environments.
-Good workability
-For ceramic fixing in cement-based surfaces.
- For ceramic fixing in gypsum surface after being treated with
DW PRIMER.
AREA OF USE
DW 1100 is used for laying ceramic tiles, tiles of small dimensions on various surfaces such as: concrete, cement and plaster-based floors. This product is suitable for indoor environments.

Datasheet
DW 1100.pdf

DW 2000
Cement-based adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles.

CLASSIFICATION OF PRODUCT
DW 2000 is classified as C2T according to EN 12004, base C - cement, Nr. 2 - adhesive with high adhesive strength, T - resistance to slip.

CHARACTERISTICS
- For indoor and outdoor use.
- For moist environments
- Good workability
- For ceramic, gres, porcelain tiles fixing.
- For ceramic, gres and porcelain tiles fixing in gypsum surface after being treated with DW PRIMER.

AREA OF USE
DW 2000 is used for laying ceramic, gres and porcelain tiles, and tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor environments. DW 2000 can also be applied in deformable surfaces, such as: gypsum or wood tiles, under-floor heating, when it is reinforced with FLEXIT additive; this additive improves technical adhesive parameters.

Datasheet
DW 2000.pdf

DW 2200 RAPID
Cement-based, fast drying adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles.
CLASSIFICATION OF PRODUCT
DW 2200 RAPID is classified as C2F according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, F fast final drying.
CHARACTERISTICS
-For indoor and outdoor use.
- For moist and dry areas
- Improvement of working parameters
-For fixing ceramic, gres, porcelain tiles.
- For fixing ceramic, gres and porcelain tiles in gypsum surface, after it is treated with DW PRIMER.
AREA OF USE
DW 2200 RAPID is used for laying ceramic, gres and porcelain tiles, and tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use. DW 2200 RAPID can also be applied in deformable surfaces, such as: gypsum or wood tiles, under-floor heating, where it is reinforced with DW 17 additive; this additive improves technical adhesive parameters.

Datasheet
DW 2200 RAPID.pdf

DW 2200 RAPID PLUS
Cement-based, bi-component, very flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles in hard surfaces.
CLASSIFICATION OF PRODUCT
DW 2200 RAPID PLUS is classified as C2FTE S2 according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, E prolonged working time, F fast final drying. According to EN 12002 it is classified as S2, high flexibility.

Datasheet
DW 2200 RAPID PLUS.pdf

DW KLEBEMORTEL 2.5
Cement-based, flexible adhesive, for the adhesion of ceramic, gres,
porcelain, etc, tiles.
CLASSIFICATION OF PRODUCT
DW Klebemortel 2.5 is classified as C2TE according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, E extended open time and prolonged working time
CHARACTERISTICS
-For indoor and outdoor use
- For moist areas
-Good workability
-For fixing ceramic, gres, porcelain tiles in hard surfaces.
- For fixing ceramic, gres and porcelain tiles in gypsum surface, after being treated treated with DW PRIMER.
- For fixing ceramic, gres and porcelain tiles on old existing tiles.
AREA OF USE
DW KLEBEMORTEL 2.5 is used for laying ceramic, gres and porcelain tiles, and tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use. DW KLEBEMORTEL 2.5 can also be applied in deformable surfaces, such as: gypsum or wood tiles, under-floor heating when it is reinforced with FLEXIT additive, which improves technical adhesive parameters.

Datasheet
DW KLEBEMORTEL 25.pdf

DW 3000
Cement-based and flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles.
CLASSIFICATION OF PRODUCT
DW 3000 is classified as C2TE S1 according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, and E
prolonged working time and S1 as flexible adhesive.

Datasheet
DW 3000.pdf

DW 3000 PLUS
Cement-based, bi-component, very flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles in hard surfaces.
CLASSIFICATION OF PRODUCT
DW 3000 PLUS is classified as C2TE S2 according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, E prolonged working time. According to EN 12002 it is classified as S2, high flexibility.

Datasheet
DW 3000 PLUS.pdf

DW URBAN 40
Cement-based, flexible adhesive for the adhesion of ceramic, gres,
porcelain, etc, tiles.
CLASSIFICATION OF PRODUCT
DW URBAN 40 is classified as C2TE S2 according to EN 12002 is classified as S2 high flexible adhesive, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, E prolonged working time.
CHARACTERISTICS
-For indoor and outdoor use.
- For moist areas
-Good workability
-For fixing ceramic, gres, porcelain tiles in hard surfaces.
- For fixing ceramic, gres and porcelain tiles on gypsum surface, after being treated with DW PRIMER.
- For fixing ceramic, gres and porcelain tiles on old existing tiles.
- For fixing ceramic, gres and porcelain tiles on floors with central
heating.
-Suitable for pools.
AREA OF USE
DW URBAN 40 is used for laying ceramic, gres and porcelain tiles, and tiles of different dimensions on various surfaces, such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use. DW URBAN 40 can also be applied in deformable surfaces, such as: gypsum or wood tiles, floors with central heating, where it is reinforced with FLEXIT additive; this additive improves technical adhesive parameters.

Datasheet
DW URBAN 40.pdf

DW URBANLIGHT 40
Cement base tile adhesive, composed from special light weight filler, special cement, produced with Low Dust technology for the adhesion of all types of tiles even in non stable substrate, with improved opening quality.
CLASSIFICATION OF PRODUCT
DW URBANLIGHT 40 is classified as C2TE S2 according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonged working time. According to EN 12002 it is classified as S2 high flexible.
CHARACTERISTICS
-For indoor and outdoor use
- For moist and dry areas
-Improved working paramenters
-Good workability
-For fixing ceramic, gres, porcelain tiles on hard surfaces.
-For fixing ceramic, gres and porcelain tiles on gypsum surface, after
being treated treated with DW PRIMER.
-For fixing ceramic, gres and porcelain tiles on old existing tiles.
-For fixing ceramic, gres and porcelain tiles on floors with central heating system.
-For fixing ceramic, gres and porcelain tiles on unstable substrates
-For fixing ceramic, gres and porcelain tiles on unstable facades.
AREA OF USE
DW URBANLIGHT 40 is used for laying ceramic, gres and porcelain tiles, tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use. DW URBANLIGHT 40 can also be applied in deformable surfaces, such as: gypsum or wood tiles, floors with central heating system, thanks to its technical adhesion parameters.

Datasheet
DW URBANLIGHT.pdf

DW 5000
Thixotropic, elastic, ready to use adhesive; its base consists of the water dispersion of polyacrylic esters and special additives.
CLASSIFICATION OF PRODUCT
DW 5000 is classified as D2TE according to EN 12004, dispersion base, 2 improved adhesive strength, E extendet open time and T resistance to slip
CHARACTERISTICS
Thixotropic, elastic, ready to use adhesive; its base consists of the water dispersion of polyacrylic esters and special additives. It is resistant to moisture, diluted acids, alkaline surfaces (concrete, plaster), and does not affect materials that are sensitive towards diluents. It has a long lifetime, and is sufficient for layers of big surfaces by creating excellent adhesion in varnished surfaces and in rough surfaces too. It shows great initial and final resistance in adhesion. It is ranked in D2TE category according to EN 12004.
AREA OF USE
DW 5000 is suitable for adhering tiles, rolo (page 48) with a soft PVC, stadium grass, LINOLEUM and carpet in prefabricated concrete, but not mortar floors, mosaics, MDF floor, marine or wood plywood, in liner or galvanized metal sheets. It is perfect for lying thermal isolation tiles of inflated or laminated polyester, polyurethane and plug panels (polyurethane and cork panels, page 48) in concrete, plaster, porobeton masonry, in indoor and outdoor surfaces. It is suitable for an isolated lying of ceramic tiles in wood and its products. It is also offered for mounting in environments where there is significant movement, such as hospitals, hotels, and in environments with vibrations, such as ships, etc.

Datasheet
DW 5000.pdf

DW FIRE
Refractory mortar, with cement, synthetic resins and special additives for environments of high temperatures.
CHARACTERISTICS
Cement-based powder for environments with high temperatures and high mechanical resistance, for fillings in a thickness of 20 mm/layer. It does not contract, nor does it create cracks. It provides an excellent workability, adhesiveness, resistance to high temperatures and strikes. Thanks to its hydraulic connections, special polymers, selected inerts and synthetic fibers, it does not crack nor slip in large thicknesses.
AREA OF USE
DW FIRE is applied in all of those environments where a high resistance to temperatures is required, such as: furnaces, fireplaces, etc.

Datasheet
DW FIRE.pdf

DW HOLZFIX
Cement-based, bi-component, very flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles in hard surfaces.
CLASSIFICATION OF PRODUCT
DW HOLZFIX is classified as C2S2 according to EN 12004,, base C
cement, 2 adhesive with high adhesive strength. According to EN 12002 it is classified as S2, high flexibility.

Datasheet
DW HOLZFIX.pdf

DW SELFWETTING
Cement-based adhesive with a prolonged working time and quick solidifying time, for the adhesion of ceramic, gres, porcelain, etc, tiles.
CLASSIFICATION OF PRODUCT
DW SELFWETTING classified as C2FTE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, E prolonged working time, F fast final setting.
CHARACTERISTICS
-For indoor and outdoor use.
-For moist and dry areas
-Improvement of working parameters
-For fixing ceramic, gres, porcelain tiles in hard surfaces.
-For fixing ceramic, gres and porcelain tiles in gypsum surface, after being treated with DW PRIMER.
-For fixing ceramic, gres and porcelain tiles on old existing tiles.
-For fixing ceramic, gres and porcelain tiles on under-floor heating.
AREA OF USE
DW SELFWETTING is used for laying ceramic, gres and porcelain tiles, and tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use.

Datasheet
DW SELFWETTING.pdf

DW MARMOFLEX
Cement-based and flexible adhesive, for the adhesion of marble and granite tiles.
CLASSIFICATION OF PRODUCT
DW Marmoflex is classified as C2TE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonged working time.
CHARACTERISTICS
-For indoor and outdoor use
- For moist and dry areas
-Improving working parameters
-For fixing marble and granite tiles in hard surfaces.
- For fixing marble and granite tiles in gypsum surface, after being treated with DW PRIMER.
- For fixing marble and granite tiles on old existing tiles.
- For fixing marble and granite tiles on under-floor heating.
AREA OF USE
DW Marmoflex is used for laying marble and granite tiles, and tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use.

Datasheet
DW MARMOFLEX.pdf

DW GRANDFIX
Cement-based, flexible adhesive, for the adhesion of natural stone tiles.
CLASSIFICATION OF PRODUCT
DW GRANDFIX is classified as C2TE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonged working time.
CHARACTERISTICS
-For indoor and outdoor use
- For moist and dry areas
-Good workability
-For fixing natural stone tiles in floors and facades.
AREA OF USE
DW GRANDFIX is used for laying ceramic, gres and porcelain tiles, tiles of different dimensions on various surfaces such as: concrete, isolating coatings, cement, plaster, old tiles, etc. This product is suitable for indoor and outdoor use. DW GRANDFIX can also be applied in deformable surfaces, such as: gypsum or wood tiles, central heating floors when it is reinforced with FLEXIT additive, which improves technical adhesive parameters.

Datasheet
DW GRANDFIX.pdf

DW VETROSYSTEM
Adhesive for the adhesion and filling of joints in glass brick walls.
CLASSIFICATION OF PRODUCT
DW GRANDFIX is classified as C2TE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonged working time.
TECHNICAL FEATURES
-DW VetroSystem is a material of based on cement, sand with selected granulometry, synthetic resins and additives.
-It creates a very good and stable adhesion in time.

Datasheet
DW VETROSYSTEM.pdf

DW 7000 EPOXY
Two component epoxy base tile adhesive, free of solvents. It is characterized by high resistance to compression, flexural and adhesive strength. DW 7000 EPOXY is resistant to some acids, alkalis, corrosive concrete agents, cleaning agents, sea water and salt water.
CLASSIFICATION OF PRODUCT
According to EN 12004 standard, it is classified as R2T tile adhesive, with improved adhesive strength and without vertical slip.
CHARACTERISTICS
The product is characterized by outstanding workability, and the work tools easily cleaned with water before the solidification of the product.
AREA OF APPLICATION:
DW 7000 EPOXY is applied in those environments where high strength to mechanical loads and resistance to chemical agents is required. The product is used for adhering tiles in industrial environments. It is used for fixing tiles on the walls, and for filling joints in walls in industrial environments, such as: breweries, dairies, laboratories, slaughterhouses and in other sectors of food or chemical industry, as well as swimming pools, kitchens etc. It is suitable for fixing tiles in different surfaces, such as concrete, mortar, metal, wood, etc. it can also be used for filling joints up to 6 mm wide.

Datasheet
DW 7000 EPOXY.pdf

DW 7100 EPOFAST
Free of solvents. It is characterized by high resistance to compression, flexion and adhesive strength. DW 7100 EPOFAST is resistant to some acids, alkalis, corrosive concrete agents, cleaning agents, sea water and salt water.
CLASSIFICATION OF PRODUCT
According to EN 12004 standard, it is classified as R2FT tile adhesive, with improved adhesive strength, fast drying time and without vertical slip.
CHARACTERISTICS
The product is characterized by outstanding workability, and the work tools easily cleaned with water before the solidification of the product.
AREA OF APPLICATION:
DW 7100 EPOFAST is applied in those environments where high strength to mechanical loads and resistance to chemical agents is required. The product is used for adhering tiles in industrial environments. It is used for fixing tiles on the walls, and for filling joints in walls in industrial environments, such as: breweries, dairies, laboratories, slaughterhouses and in other food sectors or chemical industry, as well as swimming pools, kitchens etc. It is suitable for fixing tiles in different surfaces, such as concrete, mortar, metal, wood, etc. it can also be used for filling joints up to 6 mm wide.

Datasheet
DW 7100 EPOFAST.pdf

DW 9000 EPO-UNI
Is a bi-component tile adhesive, free of solvents. It is characterized by high resistance to compression, flexion and adhesive strength. DW 9000 Epo - Uni is resistant to some acids, alkalis, corrosive concrete agents, cleaning agents, sea water and salt water. The product is characterized by an excellent workability, and the work tools are easily cleaned with water before the solidification of the product.
AREA OF USE
DW 9000 Epo–Uni is applied in those environments where high strength to mechanical loads and resistance to chemical agents is required. The product is used for adhering tiles in industrial environments.
DW 9000 Epo–Uni serves for the adhesion of TPE membranes in the dilatation joints, by resisting negative and positive pressures.

Datasheet
DW 9000 EPO-UNI.pdf

DW CONEXION 55
Cement-based adhesive, for the adhesion of thermal insulation EPS
panels.
CHARACTERISTICS
- High adhesion to mineral substrates and EPS panels
- Very good workability
- Resistant to weather conditions
AREA OF USE
DW Conexion 55 is cement- based adhesive for bonding EPS panels in DAST ETICS (external thermal insulation systems). DW Conexion 55 is used to attach EPS insulation panels in new facilities, as well as in existing buildings that will renovate facades with insulating system.

Datasheet
DW CONEXION 55.pdf

DW CONEXION 77
Prepared,grey and white cement-based mortar, composed from Protland Cement with excellent qualities, carbonate stone filler with selected granulometry, synthetic resins and special additives, which improve the workability, adhesion and increase the hydrophobicity of the dry mortar.
AREA OF USE
DW CONEXION 77 serves for the adhesion of all types of panels that are generally used for the realization of thermal insulation systems, such as: styrofoam, graphite, mineral fibers panels in brick walls, concrete or cement-based mortar.
APPLICATION PROCEDURE
Surface preperation
The supports must be compact, seasoned and steady, without cracks, oils, paints or detachable parts. Check to see if the bricks are securely attached and do not have parts that can detach. If there are such
parts, remove them repair surface with mortar. Walls that are coated with grout must be scraped in order to verify if the surface under it was painted with old and badly attached paints, or if there are detachable parts. Powdered surfaces should be treated with Tecnofix Liquid primer. Surperficial cracks can be caulked with DW Conexion 77, while deep structural cracks should be treated in a way to eliminate the causes and not repeat them. If the surface is not flat or straight, it should be flattened or made straight using Tecnofix.

Datasheet
DW CONEXION 77.pdf

DW CONEXION 99
Prepared,grey and white cement-based mortar, composed from
Protland Cement with excellent qualities, carbonate stone filler with selected granulometry, synthetic resins and special additives, which
improve the workability, adhesion, flexibility and increase the hydrophobicity of the dry mortar.
AREA OF USE
DW CONEXION 99 serves for the adhesion and then for the leveling of all types of panels that are usually used for the realization of thermal insulation systems, such as: styrofoam, polyurethane, wool stone, wool glass, graphite, mineral fibers in brick walls, concrete or cement-based mortar. DW CONEXION 99 is a pre-prepared, gray or white, cement-based, Portland material of excellent quality, with carbonate stone sand of selected granulometry, synthetic resins and special additives, which improve the workability, adhesiveness on rough surfaces and increase the hydrophobicity of the strengthened mortar against rains. The leveling of the panels should be made in two layers, combining those with glass- fibers mesh, which is resistant to alkali.

Datasheet
DW CONEXION 99.pdf

DW CONEXION PLUS
Serves to fix the thermal insulation panels EPS, mineral panels, and to apply a thin layer reinforced with mesh for the thermal insulation of buildings.
CHARACTERISTICS
- No need to apply a primer before applying the product
- Lower consumption
- High adhesion
- Allows vapor diffusion
- Flexible
- Resistant to cracking
- Resistant to weather conditions
AREA OF USE
Conexion Plus is a cement- based adhesive for bonding and EPS panels and mineral panels in DAST ETICS (external thermal insulation systems).
DW Conexion PLUS is used to bond thermal insulation panels in new facilities, as well as in existing facilities which will renew their facades with thermal insulating system.

Datasheet
DW CONEXION PLUS.pdf

DW Conexion foam D 33
Polyurethane-based, mono-component, with low expansion adhesive for thermal insulation panels. It is suitable to seal thermal insulation materials with the help of a pistol for PU foam. The foam is hardened in reaction with air humidity.
CHARACTERISTICS
D33 is a polyurethane-based foam for the adhesion of thermal insulation panels. It has low expansion, it is mono-component and has good adhesiveness on Styrofoam, styrodur and mineral wool. However, it does not adhere on polyethylene, silicone and PTFE. Advantages of
using a polyurethane-based D33 adhesive for thermal insulation panels are:
-Easy to use
-Economical consumption of material
- Less expensive
- Solidifies quickly and is resistant to moisture and low temperatures
• It is environmentally friendly because it does not contain CFC
• It is in compliance with ETAG 004 standard

Datasheet
DW Conexion foam D 33.pdf

DW PARQUET F 22
Fast drying adhesive for water-based dispersion wooden floors, free of solvents.
CHARACTERISTICS
- DW PARQUET F 22 is a synthetic, fast drying, water emulsion-based and with low water content adhesive
- DW PARQUET F 22 solidifies even in temperatures near freezing.
However, installation is recommended to be made at least at +10°C.
- DW PARQUET F 22 has a high adhesiveness, which makes trafficability possible after 24 hours.
- After water evaporation, DW PARQUET F 22 reaches a high level of
flexibility and adhesiveness, and is resistant to normal hygrometric
movements of wood and to thermal expansion of surface.
- DW PARQUET F 22 is completely resistant to mold and bacteria, thanks to the special layers it contains.

Datasheet
DW PARQUET F 22.pdf

DW PARQUET S 33
Silylate polymer-based adhesive for wooden parquets, with very low emission of volatile organic compounds, VOCs.
CHARACTERISTICS
-DW PARQUET S 33 is a synthetic, ready –to- use adhesive.
-DW PARQUET S 33 solidifies even in near- freezing temperatures. However, its installation is recommended to be made at least in +10°C.
-DW PARQUET S 33 has a high adhesiveness, which makes trafficability possible after 24 hours.
-DW PARQUET S 33 achieves a high level of flexibility and adhesion and is resistant to normal hygrometric movements of wood and thermal expansion of surface.
-DW PARQUET S 33 is completely resistant to mold and bacteria, thanks to the special layers it contains.
- Not classified as dangerous material.

Datasheet
DW PARQUET S 33.pdf

DW PARQUET FS 44
Bi-component, polyurethane-based, with very low emission of volatile organic compounds, VOCs adhesive for all types of parquets.
CHARACTERISTICS
-DW PARQUET FS 44 is a bi-component adhesive.
-DW PARQUET FS 44 solidifies even in temperatures near freezing. However, its installation is recommended to be made at least in
temperatures +10°C.
-DW PARQUET FS 44 has a high adhesiveness, which makes trafficability possible after 24 hours.
-DW PARQUET FS 44 reaches a high level of flexibility and adhesion and is resistant to normal hygrometric movements of wood and to thermal expansion of surface.
-DW PARQUET FS 44 is completely resistant to mold and bacteria, thanks to the special layers it contains.
-Not classified as dangerous material.

Datasheet
DW PARQUET FS 44.pdf

DW TEXTILE ECO 70
Bi-component, polyurethane-based varnish, with high resistance to consumption, for extremely high-traffic floors.
CHARACTERISTICS
-DW Textile ECO 70 is a synthetic, fast drying, water emulsion-based adhesive, low emission of VOC - s.
- DW Textile ECO 70 solidifies even in near freezing temperatures. However, installation is recommended to be made at least in temperatures +10°C.
- DW Textile ECO 70 has a high adhesiveness, which makes trafficability possible after 24 hours in heavy traffic.
- DW Textile ECO 70 reaches a high level of flexibility and adhesiveness.
- DW Textile ECO 70 is completely resistant to mold and bacteria, thanks to the special layers it contains.

Datasheet
DW TEXTILE ECO 70.pdf

DW PVC ECO 110
Fast drying, water-based dispersion adhesive for the adhesion of PVC-s, solvents-free.
CHARACTERISTICS
- DW PVC ECO 110 is a synthetic, fast drying, water emulsion-based
adhesive, free of VOC - s.
- DW PVC ECO 110 has a high adhesiveness, even from the early stages of application time.
- DW PVC ECO 110 reaches a high level of flexibility and adhesiveness.
- DW PVC ECO 110 ensures excellent adhesion in any type of support.
APPLICATION PROCEDURE
Preparation of the surface
Surface must be completely dry, absorbent, leveled, mechanically stable, and free of dust, loose particles, paint, wax, oil, rust, and traces of gypsum. Moisture content should be lower than the maximum
specified by the manufacturers of parquet, 2-3% for cement-based floors and 0.5% for anhydrous- based floors. Check moisture throughout the thickness of the layer, by using a hygrometer. Floating layers on the isolations, facilitated layers and tiles should be equipped with a vapor barrier to prevent moisture condensation.

Datasheet
DW PVC ECO 110.pdf

DW SYNTHETHIC ECO 220
Polyurethane- based adhesive, for synthetic grass carpets.
CHARACTERISTICS
- DW SYNTHETHIC ECO 220 is polyurethane- based, synthetic adhesive.
- DW SYNTHETHIC ECO 220 is solvent-free.
- DW SYNTHETHIC ECO 220 reaches a high level of flexibility and adhesiveness.
- DW SYNTHETHIC ECO 220 ensures excellent adhesion in any type of support.
- DW SYNTHETHIC ECO 220 ensures good workability even in low temperatures.
APPLICATION PROCEDURE
Preparation of the surface
The surface must be pre-prepared in accordance with technical requirements of sports fields’ standards.

Datasheet
DW SYNTHETHIC ECO 220.pdf

DW VINIL ECO 330
Adhesive for carpets mounting, with water-based dispersion and free of solvents.
CHARACTERISTICS
-DW VINIL ECO 330 is a synthetic, fast drying, with water-based emulsion, and free of VOC-s.
- DW VINIL ECO 330 ensures a high adhesion even in the early stages from the time of application.
- DW VINIL ECO 330 reaches a high level of flexibility and adhesiveness.
- DW VINIL ECO 330 ensures high adhesiveness in any type of support.
APPLICATION PROCEDURE
Preparation of the surface
Surface must be completely dry, absorbent, leveled, mechanically stable, and free of dust, loose particles, paint, wax, oil, rust, and traces of gypsum. The moisture content should be lower than the maximum specified by the manufacturers of parquet, 2 - 3% for cement-based floors and 0.5% for anhydrous-based floors. Check moisture throughout the thickness of the layer, using a hygrometer. Floating layers on the isolation, facilitated layers and tiles should be equipped with a vapor barrier to prevent moisture condensation.

Datasheet
DW VINIL ECO 330.pdf

DW LINOLEUM ECO 410
Adhesive for the mounting of linoleum flooring, with water-based dispersion and free of solvents.
CHARACTERISTICS
- DW LINOLEUM ECO 410 is a synthetic, water-based emulsion adhesive, and free of VOC-s.
- DW LINOLEUM ECO 410 ensures a high adhesion even in the early stages from the time of application.
- DW LINOLEUM ECO 410 reaches a high level of flexibility and adhesiveness.
- DW LINOLEUM ECO 410 ensures high adhesiveness in any type of support.
APPLICATION PROCEDURE
Preparation of the surface
Surface must be completely dry, absorbent, leveled, mechanically stable, and free of dust, loose particles, paint, wax, oil, rust, and traces of gypsum. The moisture content should be lower than the maximum specified by the manufacturers of parquet, 2 - 3% for cement-based floors and 0.5% for anhydrous-based floors. Check moisture throughout the thickness of the layer, using a hydrometer. Floating layers on the insulations, facilitated layers and tiles should be equipped with a vapor barrier to prevent moisture condensation.

Datasheet
DW LINOLEUM ECO 410.pdf

DW RUBBER ECO 530
Adhesive for the mounting of rubber elements, with water-based
dispersion and free of solvents.
CHARACTERISTICS
- DW RUBBER ECO 530 is a water-based emulsion adhesive, free of
VOC-s.
- DW RUBBER ECO 530 ensures a high adhesion even in non-porous surfaces.
- DW RUBBER ECO 530 reaches a high level of flexibility and adhesiveness.
- DW RUBBER ECO 530 is used for the adhesion of polystyrene panels on walls and ceilings.
APPLICATION PROCEDURE
Preparation of the surface
Surface must be completely dry, absorbent, leveled, mechanically
stable, and free of dust, loose particles, paint, wax, oil, rust, and traces of gypsum. The moisture content should be lower than the maximum specified by the manufacturers of parquet, 2 - 3% for cement-based floors and 0.5% for anhydrous-based floors. Check moisture throughout the thickness of the layer, using a hydrometer. Floating layers on the insulations, facilitated layers and tiles should be equipped with a vapor barrier to prevent moisture condensation.

Datasheet
DW RUBBER ECO 530.pdf

PVC D887
Strong adhesive for PVC plastic pipes.
CHARACTERISTICS
Strong adhesive for PVC plastic pipes, for water supply and sewage pipes. Resistant to temperature changes, cold and hot water, vibrations and time. The stable and ideal density of PVC adhesive enables the filling of the pipes’ gaps that get created during the installation of equipments, thus ensuring their unbreakable attachment. Attached to the cap, it has a special spherical paintbrush, which does not peel.
APPLICATIONS
PVC D 887 adhesive is suitable to bond water supply pipes, sewage pipes and pool pipes with a diameter up to 400 mm and with a resistance up to a pressure of 16 Atm. It is possible to bond PVC pipes side to side.
APPLICATION PROCEDURE
Preparation of the surface
Clean the sides of the pipes that are going to be coated with adhesive, from dust and oils with a clean cloth. For a better adhesion, it is recommended to clean the surface beforehand.

Datasheet
PVC D887.pdf